Pages: [1]   Go Down

Author Topic: Building Glitch  (Read 4166 times)

Offline speaker

  • Newbie
  • *
  • Posts: 26
Building Glitch
« on: August 17, 2009, 11:19:08 PM »
I'm not sure if you know about this glitch already, but i figured out a way to duplicate buildings

i was making an agridome in the Plymouth campaign but decided last minute i didnt like the spot, so i moved the convec away.  It was right when it started making the agridome, so it started building without a convec.  The convec still had the agridome in it so i had it build next to the self constructing agridome, givign me two for the price of one.

perhaps i ninja'd the trigger starting the construction and the one freezing/making the convec invincible  :ph34r:  
Logged
Speaker for the Dead
pɐǝp ǝɥʇ ɹoɟ ɹǝʞɐǝdS

Offline Highlander

  • Hero Member
  • *****
  • Posts: 780
  • Outpost 2 Elder
Building Glitch
« Reply #1 on: August 18, 2009, 12:04:11 AM »
Known glitch.

It makes little impact on the game though, since trying to reproduce it is usually a waste of time. Just be glad it saved you a building when it did ;)
Logged
There can be Only one. Wipe Them out. All of Them.

Old player still playing. Visit Spark for a game of Outpost 2

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Building Glitch
« Reply #2 on: August 18, 2009, 12:04:20 AM »
I've been aware of this for a long while, although I'd mostly forgotten about it.

Never have looked into fixing this one. I suppose that might be an idea.
 
Logged

Offline CK9

  • Administrator
  • Hero Member
  • *****
  • Posts: 6226
    • http://www.outpost2.net/~ck9
Building Glitch
« Reply #3 on: August 18, 2009, 12:35:45 AM »
I say why bother?  It's very unlikely that it will give an unfair advantage in a game, as it would require you waste time on a single convec
Logged
CK9 in outpost
Iamck in runescape (yes, I still play...sometimes...)
srentiln in minecraft (I like legos, and I like computer games...it was only a matter of time...) and youtube...
xdarkinsidex on deviantart

yup, I have too many screen names

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Building Glitch
« Reply #4 on: August 18, 2009, 01:08:23 AM »
You don't have to waste a lot of time. You just have to spend the right moment trying it.
 
Logged

Offline speaker

  • Newbie
  • *
  • Posts: 26
Building Glitch
« Reply #5 on: August 18, 2009, 03:03:12 PM »
i also figured out how to make an invisible impenetrable wall, although its kinda expensive
Logged
Speaker for the Dead
pɐǝp ǝɥʇ ɹoɟ ɹǝʞɐǝdS

Offline Hidiot

  • Hero Member
  • *****
  • Posts: 1018
Building Glitch
« Reply #6 on: August 18, 2009, 04:16:24 PM »
You mean unbuildable passable tile? Yes, it happens when your Earthworker gets blown whilst building something. That's a bug worth fixing.
Logged
"Nothing from nowhere, I'm no one at all"

Offline vennom

  • Jr. Member
  • **
  • Posts: 73
Building Glitch
« Reply #7 on: August 18, 2009, 04:37:10 PM »
In multiplayer it can cause some trouble lol... i think a fast solution would be invert things, Destroy the kit in the convec and then start the construction .-. (Ill see if my debugging skills are good... ill try making this fix *-*)
Logged

Offline speaker

  • Newbie
  • *
  • Posts: 26
Building Glitch
« Reply #8 on: August 18, 2009, 09:47:27 PM »
Quote
You mean unbuildable passable tile? Yes, it happens when your Earthworker gets blown whilst building something. That's a bug worth fixing.
yes, i was quite confused the first time it happened
Logged
Speaker for the Dead
pɐǝp ǝɥʇ ɹoɟ ɹǝʞɐǝdS

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Building Glitch
« Reply #9 on: August 19, 2009, 01:02:05 AM »
If you destroy the kit first, how would you know what to build?
 
Logged

Offline Kayedon

  • Sr. Member
  • ****
  • Posts: 378
Building Glitch
« Reply #10 on: August 19, 2009, 04:29:14 AM »
Quote
If you destroy the kit first, how would you know what to build?
Teach them programming. It isn't quite like magic.
Logged
"Trust me, I'm crazy."

Offline vennom

  • Jr. Member
  • **
  • Posts: 73
Building Glitch
« Reply #11 on: August 19, 2009, 11:08:25 AM »
Quote
If you destroy the kit first, how would you know what to build?
store this information elsewhere, like a temp buffer .-. this should work...
Logged

Offline CK9

  • Administrator
  • Hero Member
  • *****
  • Posts: 6226
    • http://www.outpost2.net/~ck9
Building Glitch
« Reply #12 on: August 19, 2009, 01:29:37 PM »
I would think it would be easier to make it so the convec is not interactable a little sooner...and with the earthworker, don't let it change the tyle type until the wall is there...
Logged
CK9 in outpost
Iamck in runescape (yes, I still play...sometimes...)
srentiln in minecraft (I like legos, and I like computer games...it was only a matter of time...) and youtube...
xdarkinsidex on deviantart

yup, I have too many screen names

Offline Arklon

  • Administrator
  • Hero Member
  • *****
  • Posts: 1269
Building Glitch
« Reply #13 on: August 19, 2009, 01:42:57 PM »
Quote
I would think it would be easier to make it so the convec is not interactable a little sooner...and with the earthworker, don't let it change the tyle type until the wall is there...
The unbuildable passable area is something else, actually. It's a 3x3 square centered on the tile where the wall's being built that nothing can be built on until it's removed by the game (after wall construction successfully completes). It's a pretty dumb mechanic as it needlessly makes building large areas of walls annoying (even more so if an earthworker gets destroyed or EMP'ed) and should be removed altogether.
« Last Edit: August 19, 2009, 01:43:25 PM by Arklon »
Logged

Offline vennom

  • Jr. Member
  • **
  • Posts: 73
Building Glitch
« Reply #14 on: August 19, 2009, 03:19:46 PM »
Quote
I would think it would be easier to make it so the convec is not interactable a little sooner...and with the earthworker, don't let it change the tyle type until the wall is there...
hmm nice idea, prevent the user of using the convec before start the construction... ill try that
Logged

Offline Kayedon

  • Sr. Member
  • ****
  • Posts: 378
Building Glitch
« Reply #15 on: August 19, 2009, 09:00:28 PM »
Quote
Quote
I would think it would be easier to make it so the convec is not interactable a little sooner...and with the earthworker, don't let it change the tyle type until the wall is there...
hmm nice idea, prevent the user of using the convec before start the construction... ill try that
Personally, I'd vote to disable its use when it hits the square.
Logged
"Trust me, I'm crazy."

Offline vennom

  • Jr. Member
  • **
  • Posts: 73
Building Glitch
« Reply #16 on: August 20, 2009, 05:07:47 PM »
well, i was tryong to do this bug to try understanding it more but... i couldnt .-. it must be something rare then...
Logged

Offline speaker

  • Newbie
  • *
  • Posts: 26
Building Glitch
« Reply #17 on: August 21, 2009, 07:31:49 PM »
Quote
Quote
I would think it would be easier to make it so the convec is not interactable a little sooner...and with the earthworker, don't let it change the tyle type until the wall is there...
The unbuildable passable area is something else, actually. It's a 3x3 square centered on the tile where the wall's being built that nothing can be built on until it's removed by the game (after wall construction successfully completes). It's a pretty dumb mechanic as it needlessly makes building large areas of walls annoying (even more so if an earthworker gets destroyed or EMP'ed) and should be removed altogether.
be careful if you take it completely out, im not sure what would happen if you moved a unit where the wall was being built and then the wall tried to appear
Logged
Speaker for the Dead
pɐǝp ǝɥʇ ɹoɟ ɹǝʞɐǝdS

Offline Hidiot

  • Hero Member
  • *****
  • Posts: 1018
Building Glitch
« Reply #18 on: August 22, 2009, 05:30:09 AM »
You already have that... The wall doesn't appear and you waste 75 common metals.

How many more problems already covered will you find for us?
Logged
"Nothing from nowhere, I'm no one at all"
Pages: [1]   Go Up