Author Topic: Seed Structures  (Read 7157 times)

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Seed Structures
« on: June 10, 2018, 02:13:31 PM »
Although I've posted a few of these in the main thread, I'm starting a new thread for the updated seed structures.

Here is a new attempt at the seed lander.

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Re: Seed Structures
« Reply #1 on: June 10, 2018, 02:36:12 PM »
I really like the capsule.

The ramp look slightly offset to the side of the doorway. Is there a reason for that?

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #2 on: June 10, 2018, 02:51:40 PM »
It's probably a trick of the eye due to shadows. I suppose I can make the doors flip up instead of outward.

Offline leeor_net

  • Administrator
  • Hero Member
  • *****
  • Posts: 2352
  • OPHD Lead Developer
    • LairWorks Entertainment
Re: Seed Structures
« Reply #3 on: June 10, 2018, 03:16:03 PM »
The robots need a ramp to get to the surface so I'd keep them as flipping down. :)

That stated, I like this one but it's a bit bland? Very very grey. The original had more white, blue and purple in it. I don't know how important it is though considering that this is a hobbled together craft and it's only going to last 70 turns at most anyway.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #4 on: June 10, 2018, 04:31:24 PM »
I meant flip the doors up (instead out outward), but leave the ramps in place.

Here's another version, with extra dodads as requested.

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Re: Seed Structures
« Reply #5 on: June 10, 2018, 05:11:56 PM »
I see what you mean by trick of the shadows now. Once you mention it it's more obvious. I guess I was viewing the shadow of the door on the right as part of the opening.

Offline leeor_net

  • Administrator
  • Hero Member
  • *****
  • Posts: 2352
  • OPHD Lead Developer
    • LairWorks Entertainment
Re: Seed Structures
« Reply #6 on: June 10, 2018, 07:02:14 PM »
Definitely digging the additional details. It's like it has exactly the right amount.

Wondering though -- if you look at the top ring, there's a stark contrast between it and the top and sides of the lander. But the way the render comes out there's almost not enough anti-aliasing on it? Wondering if it's a detail that can be expanded slighting to give it a more defined edge?

It's a minor thing I think but just a thought.

Anyway, adding this one to the game. Definitely loving it.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #7 on: June 10, 2018, 10:29:52 PM »
Adjusted some colors and the top (slightly).

Offline JetMech1999

  • Full Member
  • ***
  • Posts: 115
Re: Seed Structures
« Reply #8 on: June 24, 2018, 01:25:34 PM »
I like it, I like it!

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #9 on: July 22, 2018, 11:14:14 PM »
And the updated seed building.

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Re: Seed Structures
« Reply #10 on: July 24, 2018, 03:07:16 AM »
That looks really cool. I like the base in particular. The brown band seems a little bland. It kind of feels like it lacks edges, or like it should be framed by something.

Offline JetMech1999

  • Full Member
  • ***
  • Posts: 115
Re: Seed Structures
« Reply #11 on: August 01, 2018, 06:28:41 PM »
I agree with Hooman about the base of the Seed structure, and about the brown band.  The top just looks too much like the original.  What about ringing the top, just above the brown band, with solar panels, instead of the group of eight.  Then try bringing the roof up just a little and losing the dish and whip antennae?  Just a suggestion.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #12 on: September 27, 2018, 03:12:33 PM »
Here is the first draft of a cargo lander. Not exactly a "seed" structure, but it's in the same gameplay timeline.

I tried to get away from the standard capsule style lander, though I found it hard without making some sort of scifi dropship looking thing. So I tried to pattern this after the NASA Mars EDL cargo lander concept.



I'm not sure that I like how this came out. Much like the seed lander, I found it really difficult to put ship-sized details on there without making it just look like a mess.

Offline leeor_net

  • Administrator
  • Hero Member
  • *****
  • Posts: 2352
  • OPHD Lead Developer
    • LairWorks Entertainment
Re: Seed Structures
« Reply #13 on: September 27, 2018, 09:57:44 PM »
Hmm. It's different than I would have thought. But that's not a bad thing. Actually I like the idea of something a little different.

I will say I always envisioned them being white like the tip thingy in the concept art. :D But I'll leave that up to you because that would mean they'd need to be painted and I seriously doubt they'd have the time for that.

Definitely something unexpected and different. I like it. :D

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #14 on: September 28, 2018, 12:29:09 AM »
Took me a minute to figure out what you meant. Is this what you are talking about, a whiter version?

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Re: Seed Structures
« Reply #15 on: September 28, 2018, 04:37:10 AM »
I like the ramp and legs. The body I think looks a bit too cylindrical. I would expect something a little more aerodynamic for a landing craft. I also like more of a white color. Seems like it should be white for temperature insulation.

As for painting, that should take little time or effort. The protections it provides, both against corrosion and thermal intake or emissions of radiation are likely to make it worth it. I can't imagine it not being painted.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #16 on: September 28, 2018, 12:34:45 PM »
Okay. Here's a more classic capsule shape (albeit very large). This was intended to be the colonist lander, but I can modify it to also be a cargo lander.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #17 on: January 24, 2019, 08:23:22 PM »
Leeor...I forgot that I already posted the above lander concept. I think it needs some rework, but from an abstract standpoint...what do you think of that sort of style for a colonist lander? Or should I get more creative similar to the cargo lander?

Offline leeor_net

  • Administrator
  • Hero Member
  • *****
  • Posts: 2352
  • OPHD Lead Developer
    • LairWorks Entertainment
Re: Seed Structures
« Reply #18 on: January 25, 2019, 04:35:54 PM »
I like the classic look. It would make sense from an engineering stand-point, much easier to build (already have the specs) etc.

It could use a little tooling but it's a great replacement for now.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #19 on: January 26, 2019, 10:22:35 AM »
How about something like this?

Offline Hooman

  • Administrator
  • Hero Member
  • *****
  • Posts: 4955
Re: Seed Structures
« Reply #20 on: January 26, 2019, 10:42:18 AM »
I like it. That's a big step up. Lots more detail on this one.

Offline leeor_net

  • Administrator
  • Hero Member
  • *****
  • Posts: 2352
  • OPHD Lead Developer
    • LairWorks Entertainment
Re: Seed Structures
« Reply #21 on: January 27, 2019, 06:27:17 PM »
Love it. Adding it to the game. :D

Offline JetMech1999

  • Full Member
  • ***
  • Posts: 115
Re: Seed Structures
« Reply #22 on: January 27, 2019, 07:39:11 PM »
Looks nice, White Claw.  Really nice.

Offline White Claw

  • Hero Member
  • *****
  • Posts: 854
Re: Seed Structures
« Reply #23 on: January 28, 2019, 12:29:44 AM »
Thanks guys!

I must confess, I was beating my head a little trying to figure out how to spruce this one up just a little. Took a while before I eventually grabbed the top and just pulled. It ended up giving it just the right look for me to be able to add smaller dodads without it being cluttered.