Outpost Universe Forums

Projects & Development => GORF => Hall of Fame => Topic started by: Zardox Xheonov on June 23, 2010, 09:44:05 PM

Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 23, 2010, 09:44:05 PM
*First things first; i need a huge favor from one of you expericanced programmers.. 2nd please skip anything thats not  in red if you dont have much time for chatter...

so uhhh i have this file below, i hope i did this right; my source code should be in there... this is far from completed... i just need to fix these errors, i know that moving sections of my code will help... but i don't know the specifics of where to place them... i think i placed my unitplacementcode in the wrong area...

i may not be experianced... but i think this this should be a peace of cake to fix for you programmers out there.

either rewrite it or list specific instructions*

 *(step by step please and dont assume i know the controls yet... im still going through sirbomber's tutorial..)*
*
my objective this week is to create a testgame with the following:
1 player (human)
gametype: colonygame
mapname: outcasters (created by yours truly)
disasters:none
Moral:forced 75 good steady
day/night shifting: enabled
numberbeacons: 2
beacon types: common 3 bars
starting area: south east corner (yellow human player 0)
able to run in colonygames: yes
able to run in multiplayer: no
fail conditions: none
victory conditions: none
*

Now for my overall objective (though this is planning ahead and am not focussing on this untill awile):
gametype: colonygame+ landrush enabled
mapname: outcasters
colonygamename: Renegades Starship
Disasters:all except volcanoe
Moral: 75 good steady (until command center is built)
numberofbeacons: ??? (notice thats undecided)
starting areas: south west(yellowhumanplayer), southwest (magneta eden ai), northeast and west: eden ai blue, and plymouth ai red.
Teams: yellow+magneta vs red vs blue (three teams)
have well built ai: yes
have two ai fighting eachother: yes
have third ai (magneta) on human player's side: yes
have to scan labs and ect for tech: yes
have to rescue scientist: yes
blight: no
have renegades music: no
will be available: on outpost2 (latest version)
recover wreckage: yes
obtain reinforcements: yes
both ai attack: on hard yes
victory condition: build starship
failure condition: magneta light tower destroyed
magneta light tower stats: 5000 hp heavy armor
magneta defenses: one thors guard post with 1000 hp and 200 attack
magneta other buildings: solar array (safe in distance with no way to get in litterally inpassable)
magneta get reinforcements: yes


*now please help me get the first part done...(marked in yellow)*
 i will edit this message alot, note that items marked between an * might be deleted due to sudden changes/updates
Title: Lops' Cb Training 101
Post by: Sirbomber on June 23, 2010, 10:38:26 PM
Look at my tutorials.  http://forum.outpostuniverse.net/index.php?showtopic=4796 (http://forum.outpostuniverse.net/index.php?showtopic=4796)
Work on some small examples before diving head-first into such a large project with multiple AIs.

And am I the only one who has a problem with him pretending this is some kind of Renegades continuation?
Title: Lops' Cb Training 101
Post by: Flashy on June 24, 2010, 07:04:19 AM
Post 1)
You have to write "outcaster.map" to load the map file. I've fixed some mistakes but i don't have an idea what you were trying to do with the randomisebases code. I've uploaded the code and the dll here (http://forum.outpost2.net/index.php?act=Attach&type=post&id=73634). I've modified it a bit for my environment.
Post 2)
Some errors i found:
-You have to write Unit x; and Unit Unit1; if you want to use these variables
-It's mapEarthworker, not mapEarthWorker.
-Player[0].SetColorNumber(3 - 5); doesn't work, but if you want you can write Player[0].SetColorNumber(TethysGame::GetRand(2)+3);
-You have to use the _player class for the AI
-It's a colony game, you don't need daylight/morale checks
-SD.EvacModule is in a non existing struct/class/whatever

And btw, if you want these trucks to have cargo and light, you should write x.SetTruckCargo....
Title: Lops' Cb Training 101
Post by: Hidiot on June 24, 2010, 07:39:17 AM
Quote
-You have to write Unit x; and Unit Unit1; if you want to use these variables
What exactly do you mean by that?

Because one way I understand it is that you're saying you can't write "Unit x, Unit1, <etc.>;", which we all know is not true. Yay for negation negating
Title: Lops' Cb Training 101
Post by: Flashy on June 24, 2010, 07:46:07 AM
Of cause you can also write Unit x, Unit1; but LoP wrote neither Unit ...; Unit ...; nor Unit ..., ...;
Title: Lops' Cb Training 101
Post by: Hidiot on June 24, 2010, 07:58:50 AM
Oh, then say that he has to declare the variables before use. Because you have to declare any and all variables before you can use them. And unit handles are variables.
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 24, 2010, 10:22:36 AM
UPDATE!!! im i need to figure out how to get my file to compile without errors, or at least if thats how you create it into a DLL file...

my file will be updated above shortly...

please re-download the file when the givewn yes is in place below:

file updated: yes


heres my error its all in one line:

Main.cpp      5      fatal error C1083: Cannot open include file: '../Outpost2DLL/Outpost2DLL.h': No such file or directory

The above error has been fixed.
Title: Lops' Cb Training 101
Post by: Hidiot on June 24, 2010, 10:58:06 AM
LoP, step one of Outpost 2 programming is knowing the basics of programming, specifically C++ programming.

If you knew about the basics then you knew (among other things) that your source is stored in a .cpp file (probably main.cpp) What you uploaded is not a source.

I have a slight suspicion that you either skipped the part where you downloaded the SDK (required for OP2 coding), or you didn't set the compiler up properly.
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 24, 2010, 11:36:53 AM
oops my bad.. lol common mistake :P

hold on going to update now...


i think this file below is what your talking about?

EDIT: yes sirbomber.. when this is done it will be a renegades colony game for op2... though please note that this is only a 'tribute' to the renegades project and almost has nothing to do with renegades besides the 3 factions and yellow color for player 1...

(please note that by 'tribute' i mean admiration to th renegades team) more of a compliment to the renegades dream.

though i sadly believe i wasted my breather explaining this to you, i doubt you'd understand it.. much more appreciate a well thought idea that is being put into action.
Title: Lops' Cb Training 101
Post by: Flashy on June 24, 2010, 11:44:35 AM
Note: 3 minus 5 is -2 and color number -2 doesn't exist. And you should create rare mines because you need rare for a starship.
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 24, 2010, 11:46:05 AM
i'd like it yellow please :) yellow for player 1

its updated again flashy.
Title: Lops' Cb Training 101
Post by: Flashy on June 24, 2010, 02:03:56 PM
The dll you wanted
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 25, 2010, 12:03:06 PM
the following source codes i need in order to get an idea of what an ai code looks like.

entire ai proc from eden starship

entire ai pro from plymouth population


if anyone would be so kind as to post it here then that would be much appreciated :)
Title: Lops' Cb Training 101
Post by: Hidiot on June 25, 2010, 12:38:26 PM
Or make the AI yourself. It's not exactly that hard, mostly tedious. It's not like you're trying to rewrite some of the functions that make AIs work, like some of us (me included, slowly and unsurely).
Hooman wrote a project on some AI from some map I forget (I think Eden Starship?), recreating what Dynamix would have done to make the AI. Look it up.
Title: Lops' Cb Training 101
Post by: Hooman on June 27, 2010, 02:45:18 PM
Quote
entire ai proc from eden starship

entire ai pro from plymouth population


Ohhh, ohhh, me, me, pick me. I'll get this.


Code: [Select]
Export void AIProc()
{
}

 ;)


Quote
Hooman wrote a project on some AI from some map I forget (I think Eden Starship?), recreating what Dynamix would have done to make the AI. Look it up.
I believe it was CPS2. I should point out the project was an incomplete remake, and I have no idea if what's been written will work without crashing. I think it at least starts up without crashing though.
 
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on June 27, 2010, 06:04:55 PM
ok there were some complaints that the colony was in too good of a position, so i move them... though this is not taking effect until flashy compiles this following file below...

the file has the latest code within the time of this posting (excluding editing times)
and has a started 2nd ai, it only has a lynx though... i will update this a little then post it below... (by updating i mean placeing more eden lynxs) and perhaps some structures... (but not a complete base! this is plymouths territory, and the idea is that eden is only an outpost and very small, the official plymouth colony is near this map, and renegades had no choice but to relocate to this location for scientific reasons...).
Title: Lops' Cb Training 101
Post by: evecolonycamander on June 27, 2010, 07:09:49 PM
this is some of the unit placement code you asked for. just cut and past from the doc.
it is UNFINISHED i will add more later
edit: the map is also needed
=-UPLOAD REMOVED-=
Title: Lops' Cb Training 101
Post by: Sirbomber on June 27, 2010, 07:49:48 PM
Quote
Ohhh, ohhh, me, me, pick me. I'll get this.


Code: [Select]
Export void AIProc()
{
}

 ;)
Owned.
Title: Lops' Cb Training 101
Post by: evecolonycamander on June 27, 2010, 08:34:14 PM
here is the map
edit: fixed the map some more
=-UPLOAD REMOVED-=
Title: Lops' Cb Training 101
Post by: Hooman on June 28, 2010, 03:17:21 AM
Rather than constantly uploading slight revisions, maybe you should consider using the SVN?
 
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on August 13, 2010, 12:49:16 PM
this rar contains 3 files: an updated version of the outcasters.map, and updated main.cpp, and a .dat file for refference of the updated main.cpp so you can visually see the changes i made... (note to see change make sure you open thhe mapper and open outcaster.map with the .dat file in the same folder).

these files are mainly for flashy to look at. others may look too.
Title: Lops' Cb Training 101
Post by: Zardox Xheonov on August 15, 2010, 07:52:25 AM
tube locations for ecc (updated 0.1)